All parts are numbered. Please assemble them in order
Before installing the machine, you should also prepare the installation tools! It is recommended that you choose the rve screwdriver set.
Let's start with 1-1. The parts package is the drive guide wheel.
Note: install one copper washer at the top and one at the bottom.
The next step is the assembly of the electric adjustment mounting plate.
Please note: the left and right side plates are different. Pay attention to the installation direction of the guide wheel group.
The figure below shows the left side panel.
Installation of canopy fixed column, also pay attention to the installation direction is not wrong.
We continue to assemble the tail drive main gear. 1-4 parts package.
It should be noted here that there are 4 holes and 4 threads on the pulley rib, and the screw needs to be fixed in the threaded hole of the other rib through the hole.
Also note that the screws need to be evenly tightened several times.
Single bearing inner sleeve.
Pay attention to the anti rust oil in the inner sleeve, which can be cleaned first and then penetrate upward from the bottom of the main gear. Then install the tail drive main gear.
